Powder Coated Wheels for Cars and Trucks

The company was founded by Sidor Hadgis in 1967 in Brooklyn, Ohio – a suburb of Cleveland – as a family operated polishing and buffing shop. Throughout the years, Areway has added both capability and capacity while maintaining the highest quality standards and environmentally friendly processes and products.

Sidor’s son, John Hadgis, is the owner of the business and over[1]sees its daily operations. In the early days, Areway was polishing, buffing, and plating metal parts for various industries that included the automotive, truck and motorcycle industries to everyday home items such as pots, pans, appliance trim, light, and bathroom fixtures.

Their commitment to quality eventually led them to polishing and buffing forged aluminum wheels for Alcoa. This turned out to be a good relationship for Areway as more and more vehicles around the world are being fitted with forged aluminum wheels. From Ford F150 pickup trucks, and new Z28 Camaro, to Chrysler, GM and Ferrari – Areway finishes forged and cast aluminum wheels for many of the cars and trucks that you see on the road today. Depending on a particular wheel’s finishing requirements, the process steps can differ slightly.

Areway’s high capacity proprietary buffing and polishing center can handle up to 30" diameter wheels. A typical aluminum wheel finishing process starts with automated buffing and polishing of the wheel. The wheel is sent through a custom designed 13 zone pretreatment line using environmentally friendly cleaning solution formulas supplied by Henkel . Pretreatment is an important step in the process, as it promotes coating adhesion as well as protecting against corrosion. After pretreatment, the wheel then enters the dry-off stage of the oven before powder coating.

Após a secagem, uma roda pode ir direto para o acabamento em pó e depois curar. Para outras rodas com acabamentos diferentes, são necessárias mais etapas do processo. Muitas rodas são primeiro revestidas com um primer em pó acrílico ou poliéster fornecido pela Akzo Nobel.

A camada de cor, se necessário, é frequentemente aplicada com uma tinta líquida à base de água. Às vezes, um processo de usinagem é necessário no centro de usinagem automatizado de última geração da Areway para aprimorar ainda mais o que se torna um acabamento de duas cores e prata, que atualmente é muito popular. Ou, a roda pode ir direto para um acabamento em pó acrílico de alto brilho Transparente ou um revestimento em pó de poliéster fosco.

Os processos de acabamento com tinta em pó e líquida da Areway são extremamente Flexíveis, dependendo do acabamento desejado específico do cliente para a roda. A maior parte do revestimento em pó é feita em uma única cabine de rascunho Nordson Horizon® 400 down[1] com um oscilador equipado com seis pistolas oscilantes Versa Spray® II IPS (Integral Conexão Supply) e um manual Sin[1]gle Versa Spray arma de fogo.

A pistola manual é capaz de revestir de ambos os lados da cabine, dependendo dos requisitos de acabamento da roda. O Nordson Horizon 400 é de longe o carro-chefe da operação de revestimento e é dedicado à aplicação do pó acrílico Transparente para camadas de primer e acabamento.

The Versa Spray II IPS guns are controlled by an iControl® Integrated Control System with closed-loop digital flow con[1]trol. Closed-loop digital flow control measures fluctuations in incoming air flow and compensates with a proportional valve to ensure uniform air flow to the pump.

This results in optimum repeatability and uniformity of powder on the part. The iControl system is also capable of handling up to 250 presets. Presets are pre-programmed recipes that control all application requirements for flowrate, atomizing, kV, AFC (current control), and triggering.

Presets can be customized for each wheel and/or powder. A typical wheel primer coat ranges from 1.5 to 2.0 mils while a typical top coat ranges from 2.0 to 3.5 mils. Furthermore, presets can be named with a pop-up keyboard on the 12” icon-based color touch screen making it easy for operators to select and switch between presets.

Areway’s highest production rate for coated wheels alone was 1.7 million wheels in one year. Currently, they run two shifts for the machining, buffing and polishing operations, and one shift for the coating and finishing operations. Before the trend toward larger wheel diameters, Areway was utilizing 825 overhead conveyor hooks capable of producing 700 wheels per hour.

Now with bigger wheels and a multitude of wheel designs, they have had to increase the spacing between hooks and are utilizing 617 hooks capable of 480 wheels per hour if double hung, and 240 wheels per hour for even larger diameter single hung wheels.

 A typical customer order size can consist of 25 to 2,000 wheels delivered the same week. Since Areway purchased their Nordson Horizon 400 system, they have since added a Nordson COE (Chain-On Edge) booth to spray tinted acrylic powder coatings, grey primers and polyester powder matte finishes onto the wheels.

The purchase of this second system illustrates Areway’s wheel finish[1]ing flexibility and it’s commitment to continuously expand their capabilities to better service their customers. So, next time you’re out driving and you see a sleek new Z28 Camaro in all of its muscle car glory, or any other vehicle with aluminum wheels rolling down the road – anywhere around the world – it is quite possible that it was finished at Areway Acquisition in Brooklyn, Ohio, with Nordson powder coating equipment.