450 Series Autovalve
The Series 450 meter mix autovalve features shut-off pistons, which provide precise control of dot or shot volume. Adjust its seals without disassembly of the valve body for added convenience
Overview
The autovalve's dual pistons retract and "snuff back" material from the end of the mixing nozzle, eliminating drool after each shot. Use this durable, reliable pneumatic autovalve as a stationary head or hand-held unit. The valve includes both hard-coated and lubricated pistons.
Valve, manifold, and handle must be ordered for complete assembly. For high back pressure conditions over 1,000 psi (69 bar), order a double air cylinder.
Features
- Easy to Clean: If cross contamination occurs, the manifold can be removed and cleaned without disassembly of the valve body
- Optional Stainless Steel Valve: Recommended for corrosive acrylics or epoxies
- Flush Valve Manifold: For cleaning the mixing nozzle with air or solvent. A check valve is threaded into the side of the manifold
*Viton® is a registered trademark of DuPont.
- Lubricated and Hard Coated Pistons: Lubricated with Nordson EFD Autogrease for moisture sensitive adhesives and hard-coated to resist abrasive adhesives
- Optional Polytuff, PTFE, Viton® and EP Seals: For varying chemical formulations and abrasive conditions
- Optional Night Cap Ratio Check Cap: Available for 1:1 ratio manifold
Other Available Options
Series 450 XT Snuff Back Valve
In response to consumer demand, Nordson EFD also offers an innovative dispense valve specifically for moisture sensitive, two-component urethanes. Any contact with air can cure two-component urethanes, locking up the dispense valve. The 450 XT’s production-proven design eliminates air exposure of wetted shafts.
Part Numbers
| Series 450 Autovalve | ||
| Part # | Description | Specification |
| 7702201 | 450 Autovalve | Aluminum Valve, Single Air Cylinder w/Snuff Back, GT Seals |
| 7702209 | 450 Autovalve | Aluminum Valve, Single Air Cylinder w/Snuff Back, PV Seals |
| 7702443 | 450 Autovalve | Stainless Steel Valve, Single Air Cylinder w/Snuff Back, GT Seals |
| 7702217 | 450RC Autovalve | Aluminum Valve, Single Air Cylinder w/Snuff Back, GT Seals |
| 7702216 | 450XT Autovalve | Aluminum Valve, Extended Air Cylinder w/Snuff Back, GT Seals |
Two-Component (2K) Products
Accurately Mix and Dispense
Our 2K industrial mixing systems, products, and mixer accessories are manufactured in the USA in facilities that are ISO 9001:2000 certified.
Resources & Downloads
-
Data Sheets & Guides
-
Manuals & Instructions
Other Products You May Like
Better Fluid Dispensing Blog
Our blog posts are here to help you learn more about the endless opportunities provided by innovative fluid dispensing systems. Discover new equipment, applications, and best practices for using fluid dispensers, to help improve your manufacturing processes.
Optimizing Die Attach for Surgical LED Devices with Non-Cytotoxic Silver Epoxy
Jun 30, 2026Dispensing a highly viscous, silver-filled epoxy onto a surgical LED device presents a nuanced engineering challenge:...
Read More Optimizing Die Attach for Surgical LED Devices with Non-Cytotoxic Silver EpoxyHow Precision Fluid Dispensing Powers Fiber Optic Cable Production for AI Data Centers
Jun 12, 2026Discover how precision fluid dispensing improves fiber optic cable production for AI data centers. Learn how...
Read More How Precision Fluid Dispensing Powers Fiber Optic Cable Production for AI Data CentersEncapsulating Wearable Sensors Using a Pre-Mixed Two-Part Epoxy Product
Mar 05, 2026The growing field of wearable medical technology relies heavily on miniaturized sensors capable of providing accurate...
Read More Encapsulating Wearable Sensors Using a Pre-Mixed Two-Part Epoxy Product
Need more information? Connect with us.
Contact our knowledgeable experts for equipment recommendations or technical support.