Procesamiento de película soplada con alto contenido reciclado
RKW y Nordson están tomando medidas para prepararse para el futuro permitiendo a los productores procesar películas sopladas con alto contenido reciclado
La sostenibilidad es cada vez más importante para los productos plásticos, y este mensaje ha sido reforzado tanto por la UE como por los gobiernos estatales a través de nuevas leyes, regulaciones y cargos. El material virgen utilizado en productos de embalaje estará sujeto a tasas específicas de cada país que oscilarán entre 0,23 y 0,45 euros por kilogramo de material de embalaje. Estos cambios en la Ley de Envases de la UE tienen como objetivo promover la economía circular en la industria del plástico.
Las nuevas regulaciones plantean un obstáculo importante para los productores cinematográficos. Deben modificar rápidamente su producción cinematográfica para dar cabida a un gran volumen de materiales reciclables.
Sin embargo, este desafío puede resultar ventajoso para quienes están bien preparados. En RKW de Echte (Alemania) el uso de materiales reciclables es un tema de debate desde hace tiempo. "Durante muchos años utilizamos materiales reciclables en nuestras láminas", explica Thomas Steffen, ingeniero de aplicaciones de RKW. "Estas películas se utilizan posteriormente en productos en los que se pueden cumplir los estándares de calidad mediante material reciclado".
La filtración eficiente es crucial cuando se utilizan reciclados para mantener la calidad del producto final. Los filtros fundidos se han utilizado en líneas de película soplada durante muchos años, pero en el pasado, estos filtros eran en su mayoría discontinuos, lo que requería que la línea se apagara para cambiar la pantalla. "En procesos con material virgen limpio esto no supone ningún problema", afirma Stefan Wöstmann, ingeniero de procesos de Nordson BKG, "los filtros asumen aquí una función puramente protectora y garantizan que no entren tornillos sueltos durante la alimentación del material ni otras impurezas durante el transporte". en el proceso. Pero el grado de contaminación es tan bajo que rara vez es necesario cambiar la pantalla".
Compensación de diferencias en la calidad del material
Al utilizar más material reciclado, el proceso necesita manejar un componente adicional con mucho impacto en el producto final. „La calidad del material reciclado varía considerablemente en relación con las partículas de suciedad que contiene.As a first step, continuous screen changers were implemented. These filters allow operators to change screens without interrupting production and adjust screen fineness for different production batches based on quality requirements. "As a result, we have significantly fewer machine downtimes, and the productivity of our plants has increased distinctively," reports Sven Pastrik. "We can compensate quality differences in the material very well and process high proportions of recyclate, for example, in our FFS bag production."
Thomas Steffen (RKW), Sven Pastrik (RKW), Stefan Wöstmann (Nordson BKG GmbH) presenting a Nordson® BKG® NorCon™ K-SWE continuous screen changer in a blown film line at RKW.
The goal was a system in which high-quality films could be produced in a continuous, automated process. "We needed a plant concept with fast setup and changeover times. We don't want to deal with screen changes and thus line downtimes often and for a long time, but rather ensure an extrusion process that is as uninterrupted as possible."
RKW had a positive experience with Nordson® BKG® screen changers, leading them to approach the filter manufacturer again. Their new five-layer plant is now equipped with continuous BKG® screen changers and has been running successfully since 2021. "We are very satisfied with the performance of the system. Thanks to continuous filtration, we produce high-quality films with high recycled content in an uninterrupted process and can cover a wide application window," explains Sven Pastrik.
At RKW and Nordson, they were certain that the development must go further. "The use of recyclate will continue to increase in the future," explains Stefan Wöstmann. "The EU's Green Deal and national packaging laws are massively increasing the pressure and forcing system- and component manufacturers to act."
Stefan Wöstmann (Nordson BKG GmbH) and Sven Pastrik (RKW) with the new Nordson BKG HiCon K-SWE-HD/RS recycling filter.
The Solution: An Innovative Backflush Screen Changer
To expand the application window and process higher proportions of recyclate and prospectively even highly contaminated materials, e.g., from the yellow bag, without compromising quality, a screen changer with backflush function has now come into play. "We are already seeing that the backflush technology enables the use of recyclate from the PCR area," explains Sven Pastrik."At RKW and Nordson, they were certain that the development must go further. "The use of recyclate will continue to increase in the future," explains Stefan Wöstmann. "The EU's Green Deal and national packaging laws are massively increasing the pressure and forcing system- and component manufacturers to act."
"Melt filters without a backflush function reach their limits when processing recycled material. The degree of contamination is high, and the screens become clogged quickly," explains Stefan Wöstmann. "Screens are expensive, and changing them is time-consuming. Backflushing repeatedly clears the screens of contaminants and deposits, so manufacturers need fewer filter elements, and operators have to change screens less often."
It was necessary to adjust to the conditions to achieve optimal results in blown film lines. Since the film bubble is sensitive to temperature, viscosity, and pressure changes, even minor deviations can negatively impact the final product. Adding recyclates to the process can make it even more challenging. Pressure fluctuations during screen changes, backflushing, and deaeration can significantly reduce film quality or cause downtime. To address this issue, Nordson collaborated with equipment manufacturer Windmöller & Hölscher to develop the Nordson® BKG® HiCon™ K-SWE-HD/RS backflush screen changer. This new filter is specially designed for blown film lines and has a compact design suitable for tight spaces.
Eliminating Even the Slightest Pressure Fluctuations
Maintaining constant pressure is crucial for successfully operating a blown film line. Any material withdrawal for screen changes or backflushing can result in a balancing act in this area of tension. Hence, it is imperative to avoid pressure fluctuations through intelligent solutions in the high-pressure range. Each screen change in the filtration process is a sensitive step since the empty cavity must be refilled with melt after the change. If this is done too quickly, it can lead to pressure fluctuations and quality issues. "This is a major problem with blown film lines, as the film is usually very thin and sensitive to such changes," explains Stefan Wöstmann. "The BKG HiCon K-SWE-HD/RS is equipped with the patented melt pressure-controlled venting start, which fully automates the filling of the screen cavity after the screen change and thus ensures maximum pressure consistency. In addition, filling is so sensitive that no air pockets endanger the process or the end product. Manufacturers can rely on a stable process and high blown film quality."The new BKG HiCon K-SWE-HD/RS was provided to RKW as part of a user test and installed in a 3-layer plant. "The start-up was a complete success. We installed the screen changer and produced film successfully immediately; our machine operators were thrilled," reports Sven Pastrik. "The handling of the screen changer is simple, and due to the high degree of automation, we only have to intervene minimally in the process," explains Detlef Nolte, machine operator. "The fact that a newly developed machine was installed in one of our lines without any complications and then works so well directly is quite remarkable. In addition, it is immediately apparent that the experience gained from the initial joint project has been directly incorporated into the new screen changer.”
Meeting Future Challenges
RKW and Nordson plan to continue working together long-term to meet future challenges. "The shift from virgin material only to recycled material is huge. With the BKG HiCon K-SWE-HD/RS, we offer blown film producers an efficient tool to achieve this goal, says Christian Schröder, Global Segment Manager Recycling at Nordson. "With this machine, we are helping to make plastic packaging more sustainable. We are proud of that."RKW also made a strong commitment to sustainability. Recycling is considered a crucial component of this commitment. Each site has recycling facilities that process internal and external production waste into high-quality recyclate. The company is dedicated to investing in new technologies to further this effort. Sven Pastrik explains, "Our goal is to increase the proportion of recycled material used, depending on the specification, and also incorporate PCR material. We are fortunate to have filtration experts on our team to help achieve this goal."