VersaDrum™ Bulk Melters (Heated)
VersaDrum bulk melters deliver precise application of hot melt adhesives, sealants and butyls. Modular, non-stick platens, available for 200-liter (55-gal) drums, melt adhesive on top surface of drum only, reducing thermal stress and protecting bonding characteristics. Elimination of dead spaces in hydraulic passages makes VersaDrum melters well-suited for reactive adhesives.
Overview
- Choose from smooth platens for moisture-cure, reactive hot melt adhesives or axially-finned platens for high melt rates.
- Use variable speed motors and a variety of pump types and sizes to customize for specific manufacturing requirements.
- Simplify programming with touch-screen interface that displays messages, warnings and indicators for every operator activity and machine status condition.
- Ease daily operation and maintenance with pressure control valves and single-side access for controls and drum changes.
- Available with either gear or piston pumps.
Specifications
| Type of System | Gear pumps with variable speed AC motors |
| Drum Diameter | 571 mm (22.5 in) or 567 mm (22.3) |
| Maximum Pump Rate1 | 270 kg/hr (595 lb/hr) |
| Number of Hoses/Applicators | 2 standard (hydraulic & electrical) up to 6 additional (electrical only) |
| Maximum Working Hydraulic Pressure | 85 bar (1233 psi) |
| Operating Temperature Range | 40 to 230°C (100 to 450°F) |
| Ambient Temperature Range | -5 to 40°C (23 to 100°F) |
| Temperature Control Stability | +/- 1°C (2°F) |
| Temperature Sensor | Ni 120 (or PT-100 optional) |
| Electrical Service2 | 200 VAC 3 phase delta 50/60 Hz 240 VAC 3 phase delta 50/60 Hz 400 VAC 3 phase Y 50/60 Hz 400 VAC 3 phase delta 50/60 Hz 480 VAC 3 phase delta 50/60 Hz 575 VAC 3 phase delta 50/60 Hz |
| Maximum System Power Capacity | 39000 watts |
| Weight (empty)3 | 672 kg (1,482 lb) |
| Input/Output Capability Standard | 6 Inputs 6 Outputs |
Melter Dimensions (W x H x D)
|
1520 x 3010 x 740 mm (59.9 x 118.5 x 29.2 in) |
| Installation (service) Dimensions | 2100 x 3010 x 1103 mm (82.7 x 118.5 x 43.5 in) |
| Protection | IP54 |
1 Actual rates will vary depending on adhesive types, application parameters and input voltage
2 Permitted deviation from rated line voltage is ±10%
3 Weight depends on melter configuration
Resources & Downloads
-
Brochures & Data Sheets
