Fulfill Retrofit Adhesive Fill Kit

Fulfill^® Retrofit adhesive fill kit allows operators to get the benefits of an automatic adhesive fill system with melters already installed. The Nordson Fulfill Retrofit kit is available as a simple field installation on most Nordson melters used in packaging.

Contact Us Adhesive Systems HOME

Find your local representative

Overview

The Fulfill Retrofit kit works with the new single-feed adhesive storage container and the new Nordson adhesive storage container that can be configured to feed up to four different melters.

Operator benefits include:

Reduced adhesive waste, charring, downtime and rejects
Adaptable to any application with hose length and multi-feed options
Minimized maintenance and downtime associated with adhesive char, degradation and contamination
Elimination of poor bonding and missed beads due to low or empty melter tanks
New multi-feed adhesive storage container that can transfer adhesive to up to four melters

Specifications


Fits Nordson Melters	ProBlue 4, 7, 10, 15, 30, 50 Series 3100, 3400, 3500, 3700 & 3860/3960 Mesa 4, 6, 9 & 14 DuraBlue & VersaBlue 25, 50 & 100 (VA & VT) DuraBlue & AltaBlue 10/16 AltaBlue 30/50 (TS) FM 200 Universal
Adhesive Forms	Pellets Pastilles: up to 12 mm (0.472 in diameter) Mini-slats: up to 12 mm x 12 mm (0.472 x 0.472 in)
Adhesive Transfer Maximum Rate	275 kg (600 lb)/hour (dependent on adhesive type)
Adhesive Storage Container	See Adhesive Storage Container data sheet
Transfer Hose Length	4 m (13 ft) 9 m, (29.5 ft), 18 m (59 ft)
Total Air Consumption (each feed)	17 CFM @ 3.4 bar to transfer 105.3 kg/hr (223.2 lb/hr) with 4 m hose @ 4 m rise 22 CFM @ 4.1 bar to transfer 112.5 kg/hr (248 lb/hr) with 9 m hose @ 4 m rise 30 CFM @ 6.2 bar to transfer 90.7 kg/hr (200 lb/hr) with 18 m hose @ 4 m rise
Air Conditioning	Dry, non-lubricated
Operating Air Dynamic Static	Minimum pressure 2.75 bar (0.275 MPa or 40 psi) Maximum pressure 5.5 bar (0.55 MPa or 80 psi) Maximum pressure 6.9 bar (0.69 MPa or 100 psi)
Inlet Air Connection	1/4 in. NPT female 1/4 in. BSPP female G 1/4 female
Electrical Service	100-240 single phase
Power Cord	Customer Supplied, 14-18 AWG
Dimensions Single-feed Adhesive Bin Clearance Multi-feed Adhesive Bin Clearance	(W) 480 mm x (D) 554 mm x (H) 917 mm (19 x 22 x 36 in) (W) 688 mm x (D) 667 mm x (H) 1656 mm (26 x 27 x 65 in)
Adhesive Bin Capacity Single-feed Bin Multi-feed Bin	40 kg (88 lb) usable with grate 64 kg (141 lb) usable without grate
Enclosure Rating	IP54
Noise Emission	76 dBA