Loading...
E-400 Electric Applicators
For high-speed bead applications, E-400 series electric guns provide optimum performance and superior accuracy. With cycle rates below 6 milliseconds, E-400 guns accommodate a wide range of viscosities and provide superior repeatability for greater bead pattern control and consistency.
Overview
For high-speed bead applications, E-400 series electric guns provide optimum performance and superior accuracy. With cycle rates below 6 milliseconds, E-400 guns accommodate a wide range of viscosities and provide superior repeatability for greater bead pattern control and consistency.
Benefits
- Service life is superior to pneumatic guns, lasting four times longer—reducing replacement costs
- Reliable temperature readings from the RTD sensor provide a consistent adhesive flow and uniform patterns helping improve productivity
Specifications
| ITEM | SPECIFICATION | NOTES |
| Coil Electrical Service | 380 VDC, 2A Peak, 0.4A Hold | Operating voltage of coil |
| Heater Electrical Service | 240VAC 50/60 Hz | Operating voltage of heater |
| Heater Wattage | Marked on identification plate | |
| Opening Time | 2-3 ms | Time at which it takes the valve to fully open. This time is adhesive dependent. |
| Closing Time | 2-3 ms | Time at which it takes the valve to de-energize and close fully. This time is adhesive dependent. |
| Cycle Time | 4-6 ms | Shortest total time the valve can fully open and close. This time is adhesive dependant. |
| Cycle Rate |
up to 300 Hz | Cycles are per second. This depends on the adhesive. |
| Maximum Hydraulic Pressure |
up to 103 bar (1500 psi) | Maximum rated pressure |
| Maximum Working Pressure |
82.7 bar (1200 psi) | Maximum pressure module can actuate |
| Reccommended Viscosity Range |
800-1200 mPas | Adhesive viscosity outside the recommended range may result in splashing, slower cycle times or an increase in stringing |
| Operating Temperature |
up to 190° C (375° F) | Operating over 190° C may result in premature failure. |
| Applicator Mounting |
12mm or ½″ hex/round stock | |