GP200 Remote Metering Station

GP200 remote metering stations expand production capabilities by increasing delivery points of existing melters with metered add-on precision. They provide an economical alternative to purchasing an additional melter, converting from non-metered delivery, or adding application points.

Contact Us Adhesive Systems HOME

Find your local representative

Overview

Expand application delivery points by adding one or more pumping stations between a melter and the point of application.
Improve pattern consistency and quality with metered adhesive delivery to control pressure drops that can cause hammerheads, inconsistent add-on rates per product, and burn-through on heat-sensitive substrates.
Choose from servo or AC drives, and one or two single- or dual-stream metering pumps in a wide range of outputs.
Monitor adhesive temperature and pressures via the melter control system or an auxiliary control module.
Link multiple stations together to add pumping capacity and reduce total hose length, while minimizing adhesive degradation, downtime and service.

Specifications


Capacity GP201 GP202	1 pump/motor 2 pumps/motors
Pump Type	Single or dual-stream Nordson or Feinpruf pumps
Minimum Pump Speed	7 rpm
Maximum Pump Speed	100 rpm
Recommended Pump Speed	45 rpm
Motor Type	AC, AC with encoder, or servo
Operating Temperature Range	40° to 230° C (100° to 450° F)
Adhesive Viscosity¹	1,000 to 15,000 cps
Adhesive Input Pressure Range	3.4 to 34 bar (50 to 500 psi)
Optimal Adhesive Input Pressure	6.8 to 13.6 bar (100 to 200 psi)
Pressure Relief Valve Relief Pressure	70 bar (1029 psi)
Safety Valve with Indication Relief Pressure	85 bar (1250 psi)
Inlet Hose Fitting	8, 13 or 16 mm
Outlet Hose Fitting	8 mm
Supply Voltage	240 VAC
Heated Zones	One
Temperature Sensors	100 ohm platinum RTD or 120 ohm nickel RTD
Power Consumption GP201 GP202	800 W 1200 W
Dimensions (W x D x H)² GP201 with AC motor GP202 with AC motor	140 x 240 x 635 mm (5.51 x 9.45 x 25 in.) 300 x 240 x 635 mm (11.81 x 9.45 x 25 in.)