Nordson DIMA

Corporate | Global Directory | Languages


Heat Staking Systems

Heat Staking process

Heat Staking applicationDe-forming the plastic is achieved by heating it to a temperature above the glass transition temperature via the use of super-heated air or a thermode and then applying pressure in order to create the stake. After the stake has been formed the plastic should be cooled down again below the glass transition temperature. This cooling is done under constant pressure to ensure good fixation of the parts. Cooling can be done with the use of compressed air when using a thermode.

Heat is used to make it easier to create the stake. Heat control is critical, especially for glass filled plastics which often have a process window smaller than 10 degrees Celsius. When temperatures are too high the glass fibers come out of the plastic leading to a rough surface and sticking to the thermode. If the temperature is too low the plastic will crack due to cold deformation.

Heat Staking Benefits
  • Similar and dissimilar materials may be joined: metal to metal, plastic to plastic, metal to plastic
  • Accurate control operating within a small process window
  • Local heating resulting in no damage to surrounding materials
  • Processing of glass-filled materials
  • No mechanical vibration
  • Many heat stake shapes possible through custom designed tools

Your results for: Heat Staking Systems

C-Quence - Automated in-line solution system

Nordson DIMA

With C-Quence™ Nordson DIMA offers innovative automated and integrated in-line solutions for Hot Bar Reflow Soldering, Heat Seal Bonding, ACF Laminating and/or Heat Staking applications.  

C-Prime with touchscreen

Nordson DIMA

C-Prime Desktop System for Heat Seal Bonding, ACF Laminating, Hot Bar Reflow Soldering and Heat Staking, handles the product in a fixed position, with an optional fixture, size up to 300 x 200 mm.

C-Turn with touchscreen

Nordson DIMA

C-Turn Desktop System for Heat Seal Bonding, ACF Laminating, Hot Bar Reflow Soldering and Heat Staking, handles the product in pneumatic turning unit with a diameter of 410 mm, with a fixture size up…

C-Slide with touchscreen

Nordson DIMA

C-Slide Desktop System for Heat Seal Bonding, ACF Laminating, Hot Bar Reflow Soldering and Heat Staking, handles the product in a pneumatic slide of two or three positions (max. 150 mm stroke), with…

C-Flow Controller with touchscreen

Nordson DIMA

The C-Flow Controller stands alone from other pulsed heat controllers with its unique integration of responsive temperature control and useful tools such as displacement monitoring and force control,…

C-Base with touchscreen

Nordson DIMA

The C-Base Bonding/Soldering system is a combination of a C-Flow and a C-Drive module and stands alone from other pulsed heat controllers with its unique integration of responsive temperature control…

IPC APEX Expo 2018

Nordson DIMA

IPC APEX EXPO 2018 is a five-day event like no other in the printed circuit board and electronics manufacturing industry. Professionals from around the world come together to participate in the…

C-Drive Head

Nordson DIMA

The C-Drive Bond Head is designed to deliver quality solder joints and Heat Seal bonds consistently. When coupled with a C-Flow Controller, Temperature, Force, and Displacement Monitoring give…

Nordson DIMA hot bar soldering solutions to be demonstrated at SMT Hybrid 2018

Nordson DIMA

Nordson DIMA, a division of Nordson Corporation (Nasdaq NDSN), will exhibit a range of products for hot bar soldering at SMT Hybrid 2018 in Nuremberg, Germany, June 5-7, 2018, in the AAT Aston GmbH…

SMT Hybrid Packaging 2018

Nordson DIMA

Join Nordson DIMA with AAT Aston  at SMT Hybrid Packaging in Nuremberg 2018

Search Again

Refine Search:
Applications

View All



Industries

View All