Video Library
Use the
"Show Categories" button to change the application/equipment videos you want to view.
Use the
"Show/Hide Playlist" button to show or hide the current playlist.
Nordson ASYMTEK Video Library
-
DispenseMate Series
-
IntelliJet Jetting System
-
NexJet Jetting System
-
DispenseJet DJ-9500
-
Conformal & Precise Coating
-
Solder Paste Dispensing
-
Underfill Dispensing
-
Dam and Fill Dispensing
-
Tilt Jetting
-
MEMS Solutions
-
LED Dispensing
-
SMA Jetting
-
Wafer Solutions
-
Two Component Dispensing
-
EMI Shield Spray Coating
-
DispenseJet DJ-2200
-
DispenseJet DJ-2100
-
Heli-Flow Series
-
Dual-Simultaneous Dispensing
-
Dual-Action Dispensing
-
Thermal Interface Material
-
Material Handling
-
ReadiSet Jet Cartridge
Exchanging the ReadiSet Jet Cartridge.
-
NexJet vs DJ-9500
NexJet NJ-8 System compared to our DispenseJet DJ-9500 dispensing underfill.
-
NexJet NJ-8 Wafer
NexJet NJ-8 System dispensing underfill on a wafer.
-
2nd Level Underfill
NexJet System jetting underfill.
-
Flip-Chip Underfill
NexJet System jetting underfill.
-
Flip-Chip Underfill
NexJet System jetting underfill.
-
NexJet Dual-Action Jetting
NexJet System jetting utilizing Dual-Action Dispensing.
-
Quantum Dam and Fill
Quantum 6800 dam and fill with DV-7000/8000 and NexJet System.
-
SC-350 Select Spray Applicator
The SC-350 is specifically optimized to atomize coating fluids – delivering exceptional edge definition.
-
SC-300 & SC-350
Coarse and fine spray options with the SC-300 and SC-350 Select Coat Applicators
-
EasyCoat® 6 Software Tour
Take a tour of the new user interface and see visual programming in action.
-
SC-400 UV Material
SC-400 precise coating UV material.
-
SC-400 UV Material - Angled View
SC-400 precise coating UV material.
-
SC-400 Needle Finder
SC-400 needle finder.
-
DJ-9500 Precise Coating
DJ-9500 precise coating UV material.
-
SC-300 with Tilt
SC-300 with Four-Position Tilt Accessory.
-
SC-280 Conformal Coating
SC-280 conformal coating.
-
SC-280 with Fifth-Axis
SC-280 conformal coating with Fifth-Axis Tilt accessory.
-
Dual-Simultaneous Programmable Pitch
Conformal coating time can be cut in halve by using Dual-Simultaneous Programmable Pitch .
-
Triple Valve Coating
Select Coat SL-940 with DV-01, SC-280 and SC-400 coating.
-
SC-300
Coating in Bead Mode.
-
SC-300
Coating in Monofilament Mode.
-
SC-300
Coating in Swirl Mode.
-
Conexis CX-3040
Visually Tracking Program Coating Progress on the Board.
-
FX-940UV ACI Series
Inline automated conformal coating inspection.
-
S2 Solder Paste
Spectrum II dispensing solder paste dots and lines.
-
D-595 Dual-Action Solder & SMA
DispenseMate D-585 dispensing solder paste & SMA in dual-action configuration.
-
D-595 Solder Paste MEMS
DispenseMate D-595 dispensing solder paste for MEMS application.
-
S2 ADS Solder Paste MEMS
Spectrum II using Automatic Dual-Simultaneous to dispense solder paste for MEMS application.
-
Quantum Dam and Fill
Quantum 6800 dam and fill with DV-7000/8000 and NexJet System.
-
Single Axis Tilt Jetting
Single Axis Tilt Jetting with the DJ-9500 and Spectrum II.
-
Tilt and Rotate Dual Axis Jetting
Dual Axis Jetting with the DJ-9500 and Spectrum II.
-
Tilt and Rotate Concentric Circles
Dual Axis Jetting with the DJ-9500 and Spectrum II.
-
D-595 Tilt Dispensing
DispenseMate utilizing tilt dispensing.
-
D-595 vs S2 Tilt Dispensing
Side-by-side of the DispenseMate and S2 running the same tilt program.
-
S2 ADS Solder Paste MEMS
Spectrum II using Automatic Dual-Simultaneous to dispense solder paste for MEMS application.
-
D-595 Solder Paste MEMS
DispenseMate D-595 dispensing solder paste for MEMS application.
-
LED Dual DJ-9500s
Spectrum II using Dual-Simultaneous to dispense LED application.
-
LED Dual DJ-9500s Dual-Lane
Spectrum II using Dual-Simultaneous and dual-lane to dispense LED application.
-
IntelliJet SMA
IntelliJet jetting surface mount adhesive material. Vantage vs Spectrum II.
-
D-590 Series SMA
DispenseMate D-590 Series Dual-Action SMA and Solder Paste.
-
ThermalJet TJ-03
ThermalJet jetting .
-
IntelliJet Wafer
IntelliJet jetting a wafer solution.
-
NexJet NJ-8 Wafer
NexJet NJ-8 System dispensing underfill on a wafer.
-
IntelliJet vs NexJet
Showing the capability of the IJ vs NJ.
-
Wafer Dispensing
Wafer Dispensing using the DJ-9500.
-
Two-Component Dispensing
Two-Component Dispensing Solution
-
Two-Component Dispensing
Dispensing Two-Component material into vials
-
DJ-2200 Spraying Thin Layer EMI Protection
Spraying at 4 different angles to cover the whole part.
-
DJ-2200 Spraying Thin Layer Silver
Two-Part Silver material selectively sprayed using the DJ-2200.
-
DJ-2200 Spraying Thin Layer Silver Close-up
Two-Part Silver material selectively sprayed using the DJ-2200.
-
LED Dual DJ-9500s Dual-Lane
Spectrum II using Dual-Simultaneous and dual-lane to dispense LED application.
-
Spectrum II and Chad WaferMate
Using the Chad Wafermate to load and unload wafers onto the Spectrum II Platform.
-
Spectrum II Utilizing Indexing
Using indexing to dispense on parts too big for Spectrum II Platform.
-
Spectrum II Dispensing on a Reel-to-Reel Part
Showing our capability to handle reel-to-reel parts on our Spectrum II platform.
-
D-590 Series Solder Paste
DispenseMate dispensing solder paste lines and dots.
-
D-595 Tilt Dispensing
DispenseMate utilizing tilt dispensing.
-
D-595 vs S2 Tilt Dispensing
Side-by-side comparison of the DispenseMate and S2 running the same tilt program.
-
D-590 Series TIM
DispenseMate dispensing thermal interface material.
-
D-595 CPJ
DispenseMate showing Cailbrated Process Jetting capabilities.
-
D-590 Series Offline MFC
DispenseMate showing Mass flow Control offline capabilities.
-
D-595 Dual-Action Solder & SMA
DispenseMate dispensing solder paste & SMA in dual-action configuration.
-
D-590 Series Solder Paste MEMS
DispenseMate dispensing solder paste for MEMS application.
-
IntelliJet Jetting System
ReadiSet Jet Cartridge quick exchange.
-
IntelliJet Wafer
IntelliJet jetting a wafer solution.
-
IntelliJet vs NexJet
Showing the capability of the IJ vs NJ.
-
IntelliJet Hertz
Comparing the IJ running at different speeds.
-
IntelliJet SMA
IntelliJet jetting surface mount adhesive material. Vantage vs Spectrum II.
-
IntelliJet Small Gap
IntelliJet animation jetting it a small gap.
-
IntelliJet Assembly
Assembling the IntelliJet Jetting System.
-
IntelliJet Disassembly
Disassembling the IntelliJet Jetting System.
-
DispenseJet DJ-9500
DJ-9500 dispensing underfill.
-
Wafer Dispensing
Wafer Dispensing using the DJ-9500.
-
DJ-9500 Precise Coating
DJ-9500 precise coating UV material.
-
NexJet vs DJ-9500
NexJet NJ-8 System compared to our DispenseJet DJ-9500 dispensing underfill.
-
Single Axis Tilt Jetting
Single Axis Tilt Jetting with the DJ-9500 and Spectrum II.
-
Tilt and Rotate Dual Axis Jetting
Dual Axis Jetting with the DJ-9500 and Spectrum II.
-
Tilt and Rotate Concentric Circles
Dual Axis Jetting with the DJ-9500 and Spectrum II.
-
D-595 Tilt Dispensing
DispenseMate utilizing tilt dispensing.
-
D-595 vs S2 Tilt Dispensing
Side-by-side of the DispenseMate and S2 running the same tilt program.
-
LED Dual DJ-9500s
Spectrum II using Dual-Simultaneous to dispense LED application.
-
LED Dual DJ-9500s Dual-Lane
Spectrum II using Dual-Simultaneous and dual-lane to dispense LED application.
-
IntelliJet Wafer
IntelliJet jetting a wafer solution.
-
NexJet NJ-8 Wafer
NexJet NJ-8 System dispensing underfill on a wafer.
-
2nd Level Underfill
NexJet System jetting underfill.
-
Flip-Chip Underfill
NexJet System jetting underfill.
-
Flip-Chip Underfill
NexJet System jetting underfill.
-
DispenseJet DJ-9500
DJ-9500 dispensing underfill.
-
NexJet vs DJ-9500
NexJet NJ-8 System compared to our DispenseJet DJ-9500 dispensing underfill.
-
DJ-2200 Spraying Thin Layer EMI Protection
Spraying at 4 different angles to cover the whole part.
-
DJ-2200 Spraying Thin Layer Silver
Two-Part Silver material selectively sprayed using the DJ-2200.
-
DJ-2200 Spraying Thin Layer Silver Close-up
Two-Part Silver material selectively sprayed using the DJ-2200.
-
D-595 Dual-Action Solder & SMA
DispenseMate D-585 dispensing solder paste & SMA in dual-action configuration.
-
S2 ADS Solder Paste MEMS
Spectrum II using Automatic Dual-Simultaneous to dispense solder paste for MEMS application.
-
D-595 Dual-Action Solder & SMA
DispenseMate D-585 dispensing solder paste & SMA in dual-action configuration.
-
D-595 Solder Paste MEMS
DispenseMate D-595 dispensing solder paste for MEMS application.
-
Quantum Dam and Fill
Quantum 6800 dam and fill with DV-7000/8000 and NexJet System.
-
S2 ADS Solder Paste MEMS
Spectrum II using Automatic Dual-Simultaneous to dispense solder paste for MEMS application.
-
LED Dual DJ-9500s
Spectrum II using Dual-Simultaneous to dispense LED application.
-
LED Dual DJ-9500s Dual-Lane
Spectrum II using Dual-Simultaneous and dual-lane to dispense LED application.
-
NexJet Dual-Action Jetting
NexJet System jetting utilizing Dual-Action Dispensing.
-
Quantum Dam and Fill
Quantum 6800 dam and fill with DV-7000/8000 and NexJet System.
-
D-595 Dual-Action Solder & SMA
DispenseMate D-585 dispensing solder paste & SMA in dual-action configuration.
-
S-822 Dam and Fill
Spectrum S-822 Dual-Action dam and fill with DV-7000/8000s.
-
Helios SD-960
Helios SD-960 dispensing thermal paste.