Corporate | Global Directory | Languages

Dual-Action Bracket

The Dual-Action Bracket can be used for both single-slide and dual-slide operations, and is designed to enable the use of two conformal coating applicators

The Single-Slide configuration can be used when 35 mm of clearance is required. The Double-Slide configuration provides full overboard clearance of 70 mm.

Single-Slide operation: One valve has a fixed position and the other slides up and down. Typically, the fixed side is position 1 (left side). This set up is also used when a tilt mechanism is attached to the SC-300 Swirl Coat® applicator or the SC-400 PreciseCoat® conformal coating jet.

Double-Slide operation: The first slide mechanism moves up, away from the substrate while the second one moves down closer to the target area; or vice versa. These simultaneous actions allow the applicator in use to move around the work area while the idle applicator avoids tall components.


  • Provides the flexibility to support processes with the same, or different, fluid families – resulting in high process agility
  • Accommodates virtually all applicator configurations in one design
  • Improved clearance over the substrate during coating
  • Use with two different conformal coating applicators or two of the same
  • Two configurations available:
    • Single-Slide operation, which can be used with the Four-Position Tilt Accessory
    • Double-Slide operation for full overboard clearance and additional component clearance
  • Easily adjust applicator spacing between 100, 125, and 150 mm (3.94, 4.9 or 5.9 in.)
  • For use with the Select Coat® conformal coating system
Contact Us

Signup to recieve our Newsletter Visit our LinkedIn page Follow us on Facebook Follow us on Twitter Visit our YouTube Channel

If you experience any difficulties submitting your information, please email us.

Would you like to receive marketing communications via email from Nordson Corporation, in accordance with Nordson Corporation’s Privacy Policy?