Polymer Processing Systems
BKG - EDI - XALOY

Corporate | Global Directory | Languages


Custom-enhanced screen changer extends filter life and improves product quality for PET Company KÖKSAN

05 Sep 2017

Nordson retrofitted its BKG® POLY™ Screen Changer with Filter Candles, providing 4 to 8 times longer filter life, fewer black specks and gels, and less shear stress

SEHİTKAMİL, GAZİANTEP, TURKEY, September 5, 2017: A specially retrofitted screen changer for use on a PET polymerization line has enabled KÖKSAN PET Packaging Industry Company to prolong the working life of the melt filters and improve the quality of the preforms and bottles that are produced in subsequent operations.BKG POLY Screen Changer

 

KÖKSAN, an integrated producer of resin and a wide range of PET packaging products, had been using a standard version of Nordson Corporation’s BKG® POLY™ screen changer, whose large filtration area is designed for high-volume polymerization. This unit has eight screen cavities, each of which contains a flat screen supported by a breaker plate. In the retrofit carried out for KÖKSAN, Nordson replaced these screens and breaker plates with new-design breaker plates, each bearing multiple filter candles. This increased the filtration area by a double-digit factor and provided an enhanced filtration fineness in comparison with the flat screens.  

 

The result is an increase in efficiency that has significantly extended the working life of the filters; minimized the occurrence of black specks and gels; and dramatically reduced the differential pressure at lower shear stress on the polymer.

 

Lower delta pressure across the filter, achieved with Nordson’s POLY candle filter design even at 120 % capacity production, results in long life for the polymer pumps and its mechanical seals,” said Peter Thomas V, KÖKSAN’s general manager for PET resin. “This favors uninterrupted melt pump service for years”

 

Nordson’s custom-enhancement of the BKG POLY screen changer has also enabled KÖKSAN to maintain even stricter control over the quality of the virgin resin that the company uses for manufacturing food and beverage containers, noted Mr. Thomas. “This is especially important for producing preforms, where gels and molded-in stresses can cause defective parts and waste.”

 

Nordson’s filter candles are pipe-shaped components that are installed so they are parallel to the direction of melt flow. Melt enters the candle through a filter pack, is guided to the inner core of the candle, and emerges downstream. The candles are used on screen changers to increase filtration area without increasing machine size or affecting throughput. This design, in turn, reduces pressure losses and residence time for the melt. Filter candles are available in various sizes and filtration finenesses.

 

Screen changers retrofitted with the filter candles can still be operated with standard screens and breaker plates. This possibility offers another advantage: For the start-up process or after a shutdown, flat screens provide a much more cost-effective alternative to any other filter media until the specified material quality in the polymerization process is achieved, so that the further production can be continued with filter candles to ensure best product quality and longer filter lifetime.

 

In the BKG POLY filtration system, there are four screen cavities on each of two pistons, so that the melt flow is subdivided into eight flow paths. Changing of filter elements is signaled when the pressure differential between the upstream and downstream sides of a filter element reaches a designated level. While one of the pistons removes two of the screen cavities from the process for filter element replacement, melt flow remains uninterrupted through the other six cavities. As a result, production continues during changing of the filter elements without use of any additional valve or device. 

 

KÖKSAN PET Packaging Industry Company is based in Şehitkamil, Gaziantep, Turkey. Tel: +90 (342) 357 0330 10. Fax: +90 (342) 357 0347. Email: info@koksan.com. Visit www.koksan.com.

 

###

 

Nordson Corporation engineers, manufactures and markets differentiated products and systems used for the precision dispensing of adhesives, coatings, sealants, biomaterials, polymers,  plastics and other materials, fluid management, test and inspection, UV curing and plasma surface treatment, all supported by application expertise and direct global sales and service.  Nordson serves a wide variety of consumer non-durable, durable and technology end markets including packaging, nonwovens, electronics, medical, appliances, energy, transportation, construction, and general product assembly and finishing.  Founded in 1954 and headquartered in Westlake, Ohio, the company has operations and support offices in more than 30 countries.  Visit Nordson on the web at http://www.nordson.com, @Nordson_Corp, or www.facebook.com/nordson.

 

Nordson Polymer Processing Systems provides customers with engineered components to melt, homogenize, filter, meter, and give shape to plastic and fluid coating materials. Nordson Corporation leverages the collective plastics industry experience from a series of strategic acquisitions to offer a uniquely broad portfolio of industry-leading technologies.  Nordson delivers a full range of precision melt stream products — from screws and barrels for extrusion and injection molding — to filtration systems, pumps, and valves — to the extrusion dies and pelletizing systems to meet the constantly evolving needs of the polymer industry.

 

Nordson Corporation provides customers with local technical sales, service and remanufacturing capabilities through sales organizations and regional manufacturing facilities in over 30 countries.  To learn more visit us at http://www.nordsonpolymerprocessing.com or www.facebook.com/NordsonPPS.

 

In This Section