741V Needle Valves
The 741V Series needle valve design applies low viscosity assembly fluids with accurate, extremely close repeat deposit control.
During operation, controlled pulsed air acts on the piston to withdraw the needle a preset distance from the needle seat to provide exact, repeatable fluid flow. The stainless steel needle seats in the tip adapter, virtually eliminating dead fluid volume between shots.
The Nordson EFD needle valve features adjustable fluid flow control.
Actuated by an external solenoid and operates at more than 400 cycles per minute at pressures up to 300 psi (20.7 bar).
741V with BackPack™ Valve Actuator
Actuated by a compact solenoid installed on the valve’s actuating air cylinder, creating a faster response time and less variation in shot size due to plant air supply or air line length fluctuation. Achieves air actuation speeds as short as 5 to 6 milliseconds and cycle rates up to 800 cycles per minute.
Note: The BackPack is also available separately for installation on existing 741V needle valves.
- Unaffected by entrapped air in fluid
- Low-maintenance design
- Zero dead fluid volume
- Positive shutoff
- Marking inks
- Silicone oils
- UV-cure adhesives
The complete system includes the 741V dispense valve, ValveMate™ 8000 controller, fluid reservoir, and dispense tip. For even faster throughput, integrate with an EFD automated dispensing system.
Also available, the xQR41 MicroDot™ needle valves provides precise fluid dispensing control for deposits as small as 150 µm diameter.