Nordson DAGE bondtesters perform shear tests in accordance with; JEDEC JESD22-B117, JEDEC JESD22-B116 and ASTM F1269.
The Nordson DAGE 4000Plus test system’s low force capabilities and specialist tooling allow brittle fracture testing of materials such as silicon and glass.
Nordson DAGE Bondtesters provide bump shear testing for use in the production test environment to remove the solder ball from a device or substrate.
Nordson DAGE bondtesters provide cavity shear testing as an alternative method for applying a load to a solder ball or ball bond in shear.
Nordson DAGE bondtesters provide cold bump pull tests to vertically remove the solder ball from a device or substrate by using patented tweezer jaws.
The Nordson DAGE 4000Plus micro materials test system has a range of tooling for compression testing of small samples.
The Nordson DAGE 4000Plus micro materials test system applies loads to small samples and measures the tiny movements that take place over extended time periods.
Nordson DAGE bondtesters cater for the range of die shear testing requirements from traditional die shear, high force die shear and low profile die shear.
Nordson DAGE bondtesters provide fatigue tests for a wide range of different applications.
Nordson DAGE bondtesters cater for the requirements of first bond ball pull and stud bump pull testing.
Flexural testing is used for measuring the properties of materials, particularly composites and polymers.
Nordson DAGE bondtesters provide high force pull testing (up to 100kg) for specific applications within automotive and materials testing where significantly higher pull forces are demanded.