Tip Styles

Nordson EFD produces a range of dispensing tip styles to meet any fluid dispensing or adhesive dispensing need.

Nordson EFD Dispensing Tips 

General Purpose

Passivated stainless steel dispensing tips with virgin polypropylene SafetyLok™ hubs handle a wide range of fluid dispensing and applications. Available in 1/4", 1/2", 1" and 1-1/2" lengths, with internal diameters from 0.060" to 0.004".


Tapered Tips

Smooth flow tapered tips provide fast, smooth application of medium- to high-viscosity fluids – especially thick or particle-filled materials like epoxies, RTV silicones, and even brazing paste dispensing.

Available in two styles:

  • Standard, flexible translucent tips are molded of polyethylene and contains a light-blocking additive that protects UV-sensitive fluids.
  • Rigid opaque tips are molded of polypropylene and the opacity of the material delivers light-blocking fiunctionality to protect light-sensitive fluids.

Flexible Tips

Flexible polypropylene shafts reach into hard-to-access areas and will not scratch delicate surfaces. Easily cut to size or angled as needed.


Angled Tips

Angled stainless steel tips 4 are available with 45º and 90º bends.


Brush Tips

For spreading glues and greases. Available with soft or stiff bristles.


Chamfered Tips

Chamfered tip orifice facilitates insertion between delicate surfaces. Smaller sizes are useful when making microdots through low-viscosity fluid dispensing.


ESD-safe Tips

Designed for adhesive dispensing and epoxy dispensing in electronics, disk drive, optical disc and SMT production.


MicroDot Tips

Fine gauge 1/4" stainless steel fluid dispensing tips with UV light-blocking hubs for fiber optics, medicine, disk drives and other applications where extremely small, precise fluid deposits are required.


Oval Tips

Oval dispensing tips apply flat ribbons of thick fluids like pastes, sealants and epoxies.


PTFE-coated Tips

Dispensing tips designed for optical media applications. The fast, clean cutoff reduces wicking and dripping.


PTFE-lined Tips

PTFE liner inside crimped stainless steel dispensing tip shaft provides clog-free application of cyanoacrylate and extra control when dispensing low-viscosity fluids.