Conformal Coating Media

Videos

Closed-Loop Monitoring with Laser Fan Width Control 

Different fan widths are easily achieved with Laser Fan Width Control

During the conformal coating process, the system monitors fan width for repeatable coating patterns and compensates for viscosity variations. For use with the Film Coater. 

Dual Simultaneous Micro-Coating With The DJ-9000 

Dual Simultaneous Micro-Coating With The DJ-9000

Precise amounts of UV cure material are jetted onto cell phone boards. Dual simultaneous configuration increases throughput. 

Close-up: Laser Fan Width Control Option for Conformal Coating 

Close-up: Laser Fan Width Control Option for Conformal Coating

During the conformal coating process, the system monitors fan width for repeatable coating patterns and compensates for viscosity variations. For use with the Film Coater. 

SC-280 Film Coater For Precise, Non-Atomized Conformal Coating Application 

New generation of film coater

Select Coat SC-280 Film Coater For Precise, Non-Atomized Conformal Coating Application.

SC-400 PreciseCoat using individual coating lines 

SC-400 PreciseCoat using individual coating lines

The PreciseCoat SC-400 uses pulse width modulation to deliver fluid in a jetting action, so there’s no substrate contact. 

SC-400 Precise Coating – Ideal for Tight Spaces 

SC-400 Precise Coating – Ideal for Tight Spaces

Small volumes and better control of the material deliver line widths down to 1.2 mm wide. The need for masking is eliminated because the flow is so closely controlled. Demo shown on simulated phone boards. 

SC-280N with Fifth-Axis Tilt Accessory 

SC-280N with Fifth-Axis Tilt Accessory

The tilt and rotate accessory is ideal for conformal coating of vertical surfaces and underneath components. It enhances access to tight or hard-to-reach areas that may not be achievable with the standard downward approach (0 degrees).

Four-Position Tilt Accessory for the SC-300 Conformal Coating Applicator 

Four-Position Tilt Accessory for the SC-300 Conformal Coating Applicator

Enables the SC-300 applicator to coat four sides of a part. Ideal for coating component sides or underneath components on a PCB.  It can be tilted 30 degrees from vertical position to the left, right, front or back.

SC-400 Precise Coat and SC-104/SC-204 Film Coater 

Two different coating applicators - SC-400 Precise Coat and SC-104/SC-204 Film Coater

Dual-Action Applicators  on the Select Coat SL-940 with dual applicators. Precise coat and Film Coater (104/SC-204) 

Images

Laser Fan Width Control     Swirl Coat SC-300     Swirl Coat SC-300 with Four-Position-Tilt Accessory     PreciseCoat SC-400

PreciseCoat SC-400 and Swirl Coat SC-300     SC-205 Film Coat Applicator     Select Coat SC-280