Fluid Dispensing Systems
Jets, Pumps and Valves
Conformal Coating Equipment and Accessories
Fluid Dispensing Accessories and Options
SMT and PCB Assembly
Flat Panel Display Assembly
Contact Nordson ASYMTEK
The DV-7000 Heli-Flow® pump is a third-generation encoded auger pump. The pump has a floating head for use with footed needles to make fast, repeatable dots of solder paste and silver epoxy.
The DV-8000 pump has a fixed-head design for luer needle applications. The DV-8000 pump's rigid head and fluid path can withstand high pressures generated by thick fluids at high flow rates.
As the leader in jetting technology Nordson ASYMTEK specifically designed the NexJet® System to meet the varied fluid dispensing needs of today’s fast-paced, hi-tech manufacturers.
The DV-09 valve is an air-operated, adjustable needle valve. It is designed to apply precise, repeatable deposits from a fraction of a microliter up to continuous stripes of low to high viscosity fluids.
The DV-07 is a normally closed, air-actuated diaphragm valve. This valve is designed for accurate, reliable dispensing of low to medium viscosity fluids. It is suitable for a variety of applications, from microdots to volume filling.
The DV-05A is an air-actuated diaphragm poppet valve with an adjustable precision piston stroke. This valve provides dispensing of medium to medium-high viscosity fluids, and is suitable for a variety of applications.
The DV-03 is a air-actuated balanced spool valve for consistent dispensing of high viscosity fluids. For precision, you can control the amount of fluid dispensed by adjusting the fluid pressure, pulse time, and selecting the appropriate dispense tip.
The DV-02 valve design utilizes a plastic tube as the valve mechanism. In the 'valve off' state, the tube is pinched closed by a plastic plunger. When signaled to open with the 'valve on' command, the plunger is forced back by way of a pneumatic cylinder.
Fluid flow is controlled by applying pressure to the syringe during 'valve on' and removing pressure to the syringe during 'valve off.'
The DP-3000 Linear Pump is a servo-controlled, volume displacement pump. It is a true positive displacement linear pump that is not affected by fluid viscosity, supply pressure, needle size or fluid/pump temperature.
Nordson ASYMTEK’s Slider SV-100 valve dispenses paste-type fluids with metal additives better than traditional needle dispensing using slider valve technology
Flux application using the DispenseJet® pump is a superior alternative to screen printing and ultrasonic spray. Jet dispensing eliminates the overspray and material waste associated with ultrasonic and spray application methods.
Jetting is the best way to dispense many fluids quickly and accurately. The DJ-9000 has a high shot-generation rate, can be cleaned in a few minutes, and has fast changeover of wetted parts.
The new DispenseJet DJ-9500 is Nordson ASYMTEK’s latest jet design that further expands the list of jettable fluids for a wider range of applications.
© 2013 Nordson Corporation