Fluid Dispensing Systems
Jets, Pumps and Valves
Conformal Coating Equipment and Accessories
Fluid Dispensing Accessories and Options
SMT and PCB Assembly
Flat Panel Display Assembly
Contact Nordson ASYMTEK
Asymtek’s Fids-on-the-Fly™ option is up to 5.5X faster than the traditional stop-and-capture mode for locating fiducials. Reducing time spent performing this essential, non-dispense routine can increase UPH as much as 35 percent.
Dual-action dispensing allows you to dispense two different fluids with two different Asymtek valves. The dual-action head controls the XYZ position of either valve, and the dispensing operation of each valve is completely independent and sequential.
You can reduce dispense time by at least 50 percent with Nordson ASYMTEK's dual-simultaneous dispensing. This option enables simultaneous dispense with two of the same valve/jet on one synchronous head -same fluid, same valves.
Nordson ASYMTEK’s CCD non-contact laser height sensor provides high-speed dispense height measurement for components that may be compromised by tactile sensing
Nordson ASYMTEK's two-piece tooling for contact heating features an interchangeable top plate, custom configured for a wide variety of substrate types that are trans-ported using standard-width carriers
Impingement heat ensures precise and consistent substrate heating for reliable fluid dispensing when contact heating is not an option.
Jetting is the best way to dispense many fluids quickly and accurately. The DJ-9000 has a high shot-generation rate, can be cleaned in a few minutes, and has fast changeover of wetted parts.
Flux application using the DispenseJet® pump is a superior alternative to screen printing and ultrasonic spray. Jet dispensing eliminates the overspray and material waste associated with ultrasonic and spray application methods.
Fluid flow is controlled by applying pressure to the syringe during 'valve on' and removing pressure to the syringe during 'valve off.'
The DV-02 valve design utilizes a plastic tube as the valve mechanism. In the 'valve off' state, the tube is pinched closed by a plastic plunger. When signaled to open with the 'valve on' command, the plunger is forced back by way of a pneumatic cylinder.
The DV-03 is a air-actuated balanced spool valve for consistent dispensing of high viscosity fluids. For precision, you can control the amount of fluid dispensed by adjusting the fluid pressure, pulse time, and selecting the appropriate dispense tip.
The DV-05A is an air-actuated diaphragm poppet valve with an adjustable precision piston stroke. This valve provides dispensing of medium to medium-high viscosity fluids, and is suitable for a variety of applications.
The DV-07 is a normally closed, air-actuated diaphragm valve. This valve is designed for accurate, reliable dispensing of low to medium viscosity fluids. It is suitable for a variety of applications, from microdots to volume filling.
The DV-09 valve is an air-operated, adjustable needle valve. It is designed to apply precise, repeatable deposits from a fraction of a microliter up to continuous stripes of low to high viscosity fluids.
The DV-7000 Heli-Flow® pump is a third-generation encoded auger pump. The pump has a floating head for use with footed needles to make fast, repeatable dots of solder paste and silver epoxy.
The DV-8000 pump has a fixed-head design for luer needle applications. The DV-8000 pump's rigid head and fluid path can withstand high pressures generated by thick fluids at high flow rates.
S-920N/S-922N - EnglishS-920N/S-922N - Chinese
Accuracy & RepeatabilityWhite Paper
“The Asymtek system is high quality, reliable, and is the best platform.”--Manufacturer of mobile electronic devices, Europe
“We consider that Asymtek has the best dispensing technology in the world.”--Engineer for an electronics sub-contract assembly company, Taiwan
© 2014 Nordson Corporation