Fluid Dispensing Systems
Jets, Pumps and Valves
Conformal Coating Equipment and Accessories
Fluid Dispensing Accessories and Options
Software
Legacy Products
PCB Assembly
Alternative Energy
LED Assembly
Flat Panel Display Assembly
Electromechanical
Life Science
Semiconductor Packaging
Contact Nordson ASYMTEK
Web Store
Training
Tech Tools
Library
Manuals
Profile
News
Events
History
Community
Green Policy
Careers
Nordson Home
Products
Solutions
Support
Divisions
Investors
About Nordson
With its flexible, scalable configuration, the Spectrum™ S-910N/912N fluid dispenser can be configured with single or dual lanes depending on your capacity and footprint requirements. As process needs change, the system can be upgraded in the field to add options not previously required.
Asymtek’s Fids-on-the-Fly™ option is up to 5.5X faster than the traditional stop-and-capture mode for locating fiducials. Reducing time spent performing this essential, non-dispense routine can increase UPH as much as 35 percent.
Dual-action dispensing allows you to dispense two different fluids with two different Asymtek valves. The dual-action head controls the XYZ position of either valve, and the dispensing operation of each valve is completely independent and sequential.
You can reduce dispense time by at least 50 percent with Nordson ASYMTEK's dual-simultaneous dispensing. This option enables simultaneous dispense with two of the same valve/jet on one synchronous head -same fluid, same valves.
Nordson ASYMTEK’s CCD non-contact laser height sensor provides high-speed dispense height measurement for components that may be compromised by tactile sensing
The new DispenseJet DJ-9500 is Nordson ASYMTEK’s latest jet design that further expands the list of jettable fluids for a wider range of applications.
Nordson ASYMTEK’s jetting solutions are the preferred way to dispense a large variety of fluid types quickly and accurately. The new DispenseJet® DJ-100 family of piezoelectric jets expands Asymtek’s jetting solutions.
Fluid flow is controlled by applying pressure to the syringe during 'valve on' and removing pressure to the syringe during 'valve off.'
The DV-02 valve design utilizes a plastic tube as the valve mechanism. In the 'valve off' state, the tube is pinched closed by a plastic plunger. When signaled to open with the 'valve on' command, the plunger is forced back by way of a pneumatic cylinder.
The DV-03 is a air-actuated balanced spool valve for consistent dispensing of high viscosity fluids. For precision, you can control the amount of fluid dispensed by adjusting the fluid pressure, pulse time, and selecting the appropriate dispense tip.
The DV-05A is an air-actuated diaphragm poppet valve with an adjustable precision piston stroke. This valve provides dispensing of medium to medium-high viscosity fluids, and is suitable for a variety of applications.
The DV-07 is a normally closed, air-actuated diaphragm valve. This valve is designed for accurate, reliable dispensing of low to medium viscosity fluids. It is suitable for a variety of applications, from microdots to volume filling.
The DV-09 valve is an air-operated, adjustable needle valve. It is designed to apply precise, repeatable deposits from a fraction of a microliter up to continuous stripes of low to high viscosity fluids.
The DV-7000 Heli-Flow® pump is a third-generation encoded auger pump. The pump has a floating head for use with footed needles to make fast, repeatable dots of solder paste and silver epoxy.
The DV-8000 pump has a fixed-head design for luer needle applications. The DV-8000 pump's rigid head and fluid path can withstand high pressures generated by thick fluids at high flow rates.
Nordson ASYMTEK’s SV-100 valve dispenses paste-type fluids with metal additives better than traditional needle dispensing, using slider valve technology.
S-910N/912N English
ImagesVideos
“We have chosen Asymtek for our dispensing requirements because of their deep knowledge and expertise in automated fluid dispensing. Our customers want quick-turn solutions with state-of-the-art technology. Asymtek’s dispensers provide a high level of process control, flexibility, and capability that supports this requirement. Our new Spectrum S-910N systems give us more capability in a smaller footprint, saving valuable space on our production floor.”--Pernille Louise Vinten, Production Technology Manager, DancoTech